MAYAH FLASHMAN II, Operating Manual

Page: 49 / 91

Front panel user Interface > Menu structure
49
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
football stadiums) or microphones with a very high output voltages. Other settings
are the same as for mic
Note:
·
At line input the audio signal is attenuated before it's routed to an A/D
converter. Therefore Gain (see
Monitor/Mixer ) can be set between 18 dBu
(left position) and 0 dBu (right position).
· At microphone input level the audio signal is amplified by a pre-amp.
Afterwards the signal is attenuated before it's routed to an A/D converter. Gain
(see
Monitor/Mixer ) can be set approx. between -35.3 dBu (left position) and -
56.3 dBu (right position).
·
At mic+ level the input signal is amplified by a pre-amp at lower grade than at
the mic level. Afterwards the signal is attenuated before it's routed to an A/D
converter. Gain (see
Monitor/Mixer ) can be set approx. between -14.3 dBu
(left position) and -35.3 dBu (right position).
·
Generally the mic++ input signal is treated similarly as line input signal (i.e. no
pre-amp). In opposite to line input the audio signal is amplified before it's
routed to an A/D converter. Therefore Gain (see
Monitor/Mixer ) can be set
between -10 dBu (left position) and 0 dBu (right position).
3.5.2.2.2 Mix Mode
Mixer Mode
Settings done here affect the menu item
Monitor/Mixer .
The mixer mode can be set to:
· All: