MAYAH FLASHMAN II, Operating Manual

Page: 24 / 91

Front panel user Interface > Main Screen
24
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
or
· hours:minutes:seconds (>=h)
The progress bar shows at
· Playback mode: Percentage of elapsed time to track time
· Recording: Percentage of elapsed time to available record time.
Note:
The available recording time depends on:
- size of storage device
- max. files size (4 GB)
- bit rate
Note 2:
Since current storage devices are quite big compared to the size of audio files,
often it seems that the percentage state of the progress does not change.
d) 3G/UMTS or WLAN signal strength
Best
Good
Sufficient
Bad
Blinking symbol means "no 3G/UMTS connectivity".
e) SIP registration symbol:
This symbol is displayed when FLASHMAN II has successfully registered at a
SIP registrar. How to configure SIP is described in chapter
Codec/Setup/Interface
.
f) Framing state indicator
framed
not framed, but connected
Blinking of the framing state indicator means that FLASHMAN II is currently
connecting (connection in progress).
g) Battery state indicator: e.g. (Battery is fully charged)
h) Power Supply indicator: (Power Supply connected)
i) Coding status bar