MAYAH FLASHMAN II, Operating Manual

Page: 54 / 91

Front panel user Interface > Menu structure
54
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
3.5.3.2 Setup
In this setup menu the following configurations can be done
· Settings of all possible communication interfaces
· Coding settings (Quality)
3.5.3.2.1 Interface
Here all necessary configuration steps can be done for all communication
interfaces.
3.5.3.2.1.1 Ethernet
DHCP
DHCP (= Dynamic Host Configuration Protocol) enables FLASHMAN II to
configure its IP-settings (except of SIP) automatically with help of a DHCP server.
To enable DHCP set this parameter to 'client'.
Address
- sets the IP address for the appropriate interface. (e.g. 192.168.10.50) if DHCP
is deactivated.
Netmask
- sets the subnet mask for the appropriate interface. (e.g. 255.255.255.0) if
DHCP is deactivated.