MAYAH FLASHMAN II, Operating Manual

Page: 10 / 91

First Start >
10
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
2 First Start
2.1 Before Start
· Check if scope of delivery (see chapter Scope of Delivery ) is complete with
help of the included packing list
· Recharge the original FLASHMAN II battery with the original FLASHMAN II
recharger (see also chapter
Battery Recharger ). Please just use the original
FLASHMAN II equipment. MAYAH is not liable for damages caused by none-
MAYAH equipment.
·
For later recording/playback insert either an SD/SDHC card or USB stick or
PCMCIA memory card
· For later mobile transmission insert either the original FLASHMAN II 3G/
UMTS card or the original FLASHMAN II WLAN card
2.2 Battery Charger
The original FLASHMAN II battery charger can be used in a range of
·
100-240V
and
·
50-60 Hz.
With appropriate adapters this charger nearly can be used world wide.
To enhance lifetime of FLASHMAN II battery it is strongly recommended first to
insert the FLASHMAN II battery and afterwards to connect the charger to the AC
electricity network.
The charger has got three LED's.
Meaning of LED's:
· Power (Green LED):
Lights up when charger is connected to electricity network
· Charging (Yellow LED):
Lights up during battery charging. When FLASHMAN II battery is fully charged