MAYAH FLASHMAN II, Operating Manual

Page: 58 / 91

Front panel user Interface > Menu structure
58
© 2012 MAYAH Communications
Operating Manual for FLASHMAN II
·
Auto: card decides
d) Domain
Here behaviour for the preferred domain inside the mobile cell can be set.
·
Circuit switched only
·
Packet switched only
·
Any: Circuit and/or packet switched (default)
·
No preference
·
No change
·
Packet switched attach on demand
·
Packet switched detach on demand
e) Frequency
In different parts of the world different frequencies for 3G communication are
used. Here the appropriate frequency range can be set.
·
Europe (default)
·
U.S.
f) User
3G user identification
g) Password
User confirmation by password
h) Delay
- sets the size of the receive buffer in ms.
Max. possible value 5,000 ms.
Note:
RTP packets can be resorted if they are received not in the right order. The
higher the value is, the more packets can be resorted. Generally receive buffer
value should be bigger than average network jitter (see Codec/Status/Interface)
Note 2:
If AJC is activated then a bigger delay value covers a smaller one (see
System/Misc/AJC )
General note:
Usually just PIN and APN must be entered. If you are unsure about PIN, APN,
Username and Password, please contact your mobile service provider.
3.5.3.2.1.3 WLAN
Here the settings can be done for MAYAH WLAN USB interface.
As soon as the optional WLAN USB interface is attached to a FLASHMAN II and
is activated the IP audio streaming interface is automatically set to WLAN.
WLAN may require some time to be initialized. In particular if DHCP is
active. Please pay attention to the pop-up messages on the LCD
screen when configuring or activating WLAN.