background image

Before you start the installation and the first training, please make sure that you are familiar with the entire user manual, 
especially the safety information, the maintenance & cleaning information and the training information. Also ensure that 
everyone who uses this training device is also familiar with and follows this information. Keep this manual in a safe place 
for information, maintenance and cleaning work or for ordering spare parts. 

Be sure to strictly follow the maintenance and safety instructions in this manual. 

This training device may only be used for its intended purpose, i.e. for the physical training of adults. 
Any use other than for its intended purpose is not permitted and may result in a risk of accidents, damage to health or damage to the 
training device. The distributor cannot be held responsible for damage caused by improper and inappropriate handling.

Training environment

-   Choose an installation location that gives you optimal freedom and comfort on all sides of the training device. 
  offers the greatest possible safety during the training 
-   When choosing the mounting location, make sure that the load capacity and condition of the wall is sufficient.
-   Ensure good ventilation and optimal oxygen supply during the training. Draft is not allowed avoid.
-   The installation location is an area in heavily frequented rooms or in the immediate vicinity of main directions of travel 
  (emergency exits, doors, passageways, etc.) are not permitted.
-   Your training equipment is not suitable for outdoor use, therefore storage and training with your    
  Device only possible within temperature-controlled, dry and clean rooms. 
-   The operation and storage of your training device in wet areas, such as swimming pools, saunas, etc. is not possible.
-   Ensure that your training device does not come into contact with hot objects and that there is sufficient  

 

  a safe distance is maintained to all heat sources, such as heating, stoves, open fireplaces, etc.

Personal safety instructions for the training

-   You should have a health check with your doctor before you start training.
-   If you feel physically unwell or have breathing problems, stop training immediately.
-   Always start your training sessions with a low load and increase this in the course of your
  Trainings evenly and gently. Reduce the load again towards the end of your training session.
-   Make sure that you wear suitable sports clothing and sports shoes during training.
  Please note that large pieces of clothing can get caught in components during training.
-   Your training device can only be used by one person at a time. 
-   Before each training session, check that your device is in perfect condition. 
  Never use your training device if it has faults or defects. 
-   Independent repair work can only be carried out after consultation and approval by our service department and   
  can be executed. Only original spare parts may be used.
-   Improper repairs and structural changes (fitting of non-permitted parts, dismantling of
  original components, etc.) are not permitted. This can have a negative effect on the technical safety of the device
   and dangers arise for the user.
-   Your training device must be cleaned after each use. In particular, remove all 
  Contamination caused by body sweat or other liquids.
-   Your training device is not suitable for use by children. 
-   During training, third parties - in particular children and animals - must keep a sufficient safety distance from the exerciser. 
-   Before each training session, check if there are any objects under your training device or the training area and remove them 
  you this in any case. Never train with your training device if there are objects underneath.
-   Always make sure that your training device is not used by children as a toy or climbing device will.   
-   Instruct persons, especially children, who are present during the training, about possible dangers during 
  of the training. This is especially true for the range of motion of the user.
-   Check at regular intervals (at least once a month) all components and the secure seating of screws and nuts.
   
The construction of this training device is based on the latest technical and safety standards.
This training device should only be used by adults! 
Extreme, incorrect and/or unplanned training can cause damage to health!
Any manipulation or intervention in the device not described or explained here can damage the training device or pose a danger to 
persons. 
If you have any questions or in case of doubt, please contact your specialist dealer or the MAXXUS service team. They will be happy 
to help you.

Safety Instructions

9

Summary of Contents for Chin-Up-Bar



















Reviews: