Equipment Overview & Warning Notice
Warning notice:
Assembly
outer handle
medium handle
inner handle
Base frame
Carefully unpack all parts of the scope of delivery.
Carry out the installation carefully, as damage or defects resulting from installation errors are not covered by the
warranty or guarantee under any circumstances. Therefore, read the instructions carefully before installation, follow the
sequence of installation steps exactly and follow the instructions for the individual installation steps.
The installation of the training device must be carried out conscientiously by adult persons.
Mount your training device in a place that is level, clean and free of objects that could hinder mounting. Please note that
there is always a potential risk of injury during assembly work and whenever tools are used. Therefore, always be
careful and cautious when mounting this training device.
During the individual assembly steps, make sure that all parts are only screwed together by hand and that the screws
are only tightened when all components fit exactly.
Training can only begin once the assembly of your training device is complete.
Assembly step:
Connect the right and left pull-up bar (2-right/3-left.) Use two M8x35 pan head screws (9), four Ø8 washers (8)
Insert one of the two base frames (1) each into the receptacles of the pull-up bar and fix the base frames to the pull-up
bar with two hexagon head screws M10x75 (4), four washers Ø10 (5) and two lock nuts M10 (7) each.
10
Part
Name
size
QTY
1
Base frame
2
2
Chin-Up-Bar, right
1
3
Chin-Up-Bar, left
1
4
Screw
M10x75
4
5
Washer
Φ10
8
6
Lock nut
M10
4
7
Lock Nut
M8
2
8
Washer
Φ8
4
9
Screw
M8x35
2
Use the training device exclusively for its intended purpose. Improper use may endanger the user. Read the installation
& operating instructions in detail and observe all instructions and information. Keep children and pets away from this
training device.
