______________________________________________________________________________
Page 30
LOG MESSAGES (MEMORY)
Log code Meaning
Description
1
ERROR
Log code 1 includes all error codes
2
PROGRAM START
Date/time as well as the number of the started
program
3
PROGRAM END PROG.
Date/time of the terminated program
4
START PROGRAM PAUSE
Date/time of program pause start
5
END OF PROGRAM PAUSE
Date/time of program pause end
6
SYSTEM START
Date/time of device start or restart after a power
failure
9
BOTTLE CHANGE
Date/time of a bottle change
10
SAMPLE EXTRACTION
Date/time of a sample extraction triggered by a
program
12
BTLE CHANGE
REQUESTED (REMOTE)
Bottle change triggered via a programmable input
(only possible if no program is active)
14
VOLTAGE LOSS START
Date/time of the start of a power failure
15
EVENT START
Date/time of the start of an event
16
END OF EVENT
Date/time of the end of an event
18
END OF SLEEP MODE
Date/time of the end of the sleep mode, only
possible at portable samplers
19
CONDUCTIVITY SAMPLE
MEDIUM
- 1st value: CV of pair of electrodes 1 when
detecting water
- 2nd value: CV after pre-purge
-3rd value: limit value for water detection at
pneumatic module or CV for pair of electrodes 2 at
VAR module
20
TEMPERATURE
REGULATION
1st value: internal temperature
2nd value: temperature of evaporator plate
3rd value: ambient temp. around control housing
21
BOTTLE STATISTICS
No. of samples requested, total No. of samples
taken during program run time. This data is logged
after a program has been terminated.
