![background image](http://html.mh-extra.com/html/maxwell/mw-3291/mw-3291_manual-instruction_1746541018.webp)
18
ENGLISH
•
Open the lid (10), using the groove (11) on the
unit body, take the handle (26) and remove the
dust bin (29).
•
Open the dust bin lid (25) by pressing the lock
(24), remove the primary mesh filter (27) and the
HEPA filter (28). Remove dust and garbage from
the dust bin (29).
•
Wash the dust bin (29) and the primary filter (27)
with warm water.
•
Clean the HEPA filter (28) with the brush.
Notes:
–
The cleaning brush is stored in the special
groove under the lid (10).
–
Do not wash the HEPA filter.
•
Dry the dust bin and the filter parts in a natu-
ral way. Keep them dry in order to extend their
service life.
Cleaning the roller turbo brush
•
Remove the frame holder of the brush (14) by
pressing on the locks as shown on the picture
with the arrows, and remove the brush from
the socket. Cut the hair and threads wound up
around the brush with the scissors.
•
Clean the brush from dust and wipe it with a
clean, slightly damp cloth.
•
Wipe the socket, the frame holder and the driv-
ing shaft with a clean, slightly damp cloth.
•
Install the brush back to its place in the follow-
ing manner:
–
Install one end of the brush on the driving shaft
sligthly rotating it in different directions.
–
Lower the other end of the brush into the socket
and fix it with the frame holder.
–
Make sure that the frame is fixed properly.
Cleaning the side brushes
If hair wind up around the brushes, it is recom-
mended to remove them before cleaning.
•
Unscrew the fastening screws with a cross-tip
screwdriver rotating them counterclockwise and
remove the side brushes (6).
•
Cut the hair and threads wound up around the
driving shafts with the scissors.