20
ENGLISH
If the amount of water coming out of the water tank
has significantly decreased (the cloth is no longer
sufficiently moistened), the filter may be clogged
(the filter element turns yellow), you need to clean or
replace the filter.
Perform the following actions to clean (or replace)
the filter:
•
Remove the microfiber cloth (40) from the
attachment (39), and you will see two plugs with
filter elements installed on the water tank. Take
the staples of the plug on both sides, as shown
in the pictures, and remove it together with the
filter element. You can also use the backside of
the cleaning brush for removing the plug.
filter
water tank plug
Use the backside of the cleaning brush for removing
the filter element.
•
Push the filter element out of the plug on the
side of the groove with the flat side of the brush.
•
Wash the filter element in clean water, slightly
pressing on its cylindrical side, and install it back
to its place.
Install the filter element on the plug from the groove
side squeezing it slightly with tweezers.
•
Install two plugs with the filters back into the
water tank and slightly press on them for
tighter fit.
•
Now the attachment is ready for use.
Removing battery
•
Before you dispose of the vacuum cleaner,
remove the battery and apply to the corre-
sponding center for recycling of it. Do not
burn the vacuum cleaner even if it is badly
damaged without removing the battery to
avoid the battery explosion.
•
It is recommended to remove the battery for
long storage of the vacuum cleaner.
•
Unscrew the fastening srew of the battery lid
(7) and remove the lid.
•
Detach the socket and remove the battery.
•
Install the lid (7) back to its place and tighten
the fastening screw.
STORAGE
•
Before taking the vacuum cleaner away for
long term storage, clean its body, the dust bin
(29) and the filters (27, 28).
•
Remove the batteries from the remote con-
trol.
•
Use the original package for storage.
•
Keep the vacuum cleaner in a dry cool place
out of reach of children and disabled per-
sons.
Possible troubles and troubleshooting
№
Malfunction
Possible causes
Solution
1 The battery doesn‘t
charge.
Mak sure that you use the original
power adapter.
Use the original power adapter.
The vacuum cleaner is set im-
properly on the charging station.
Make sure that the contact points for bat-
tery charging on the vacuum cleaner body
and on the charging station are clean. If
necessary, wipe the contact points.
Slightly move the vacuum cleaner body
by hands to provide better contact with
the charging station.
The power adapter of the charg-
ing station is not connected to the
mains socket, the charging sta-
tion indicator does not glow.
Connect the charging station and plug
the power adapter to the mains socket.
Make sure that the charging station
indicator glows.
