MaxTronic JanusRAID SA-6692J, Hardware User Manual

Page: 26 / 30

16
SA-6692J SATA II JBOD enclosure System
3
Ma
inten
ance
–
Rep
lacing a Powe
r Supp
ly
Replacing a Power Supply
Power supplies are hot swappable, which means that they can be inserted and removed
while the system is powered on and operating.
Follow these instructions to replace a failed power supply.
1 Identify the power supply that has failed.
2 Remove the power cable from the power supply connector at the rear of the unit.
3 Loosen the power supply retaining screw.
4 Remove the faulty power supply by pulling the power supply handle A and
pressing the release catch B at the same time.
5 Insert a new power supply.
6 Tighten the power supply retaining screw.
7 Reconnect the power cable.
Power Supply
retaining screw
Release
catch
B
A