background image

maxon motor control

Z-26

Document ID: rel2895    

MCD EPOS P Programmable Compact Drive

Edition: December 2011

MCD EPOS P 60 W Hardware Reference

© 2011 maxon motor. Subject to change without prior notice.

Table 1-1

Notations used in this Document - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  5

Table 1-2

Brand Names and Trademark Owners - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  7

Table 3-3

Motor Data – Rating - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  11

Table 3-4

Electrical Data – Rating  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  11

Table 3-5

Electrical Data – Inputs- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  12

Table 3-6

Electrical Data – Outputs  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  12

Table 3-7

Electrical Data – Interfaces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  12

Table 3-8

Electrical Data – Memory  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  12

Table 3-9

Electrical Data – LEDs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  12

Table 3-10

Electrical Data – Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  13

Table 3-11

Mechanical Data  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  13

Table 3-12

Environmental Conditions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  13

Table 3-13

Order Details - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  14

Table 4-14

LEDs – Interpretation of Condition - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  24

L

IST

 

OF

 T

ABLES

Summary of Contents for MCD EPOS P 60 W





























Reviews: