maxon motor
EPOS Positioning Controller
EPOS 24/1 Getting Started
10.
‘Startup Wizard’ Step 8 for EC motors:
Summary
a)
b)
c)
A short summary of the most important
configuration values is displayed in this
window.
If there are any mistakes in the
configuration, you can go back and
modify the values by clicking on the
button ‘Zurück’.
If you will not start the startup wizard at
the beginning of every EPOS user
interface session, you have to deselect
the option ‘Always start this wizard after
program start’.
Figure 21: Startup wizard dialog for setting
EC motor encoder resolution
d)
If all settings are correct, click the button
‘Fertig stellen’ to close the startup wizard.
11.
Save and activate parameters
r
a)
Figure 22: Save & activate the configured paramete s
Click the button ‘Yes’ to accept the parameters.
b)
Figure 23: Confirm parameter activation
Confirm by clicking the ‘OK’ button.
20
maxon motor control
Edition July 2007 / Subject to change
