maxon motor
EPOS 24/1 Getting Started
EPOS Positioning Controller
9.
‘Startup Wizard’ Step 7 for EC motors:
Position Resolution
a)
Enter the resolution of the used encoder
Figure 19: Startup wizard dialog for setting
EC motor encoder resolution
b)
a)
b)
c)
Click the button ‘Weiter’ for the next step.
9. ‘Startup Wizard’ Step 7 for DC motors:
Summary
A short summary of the most important
configuration values is displayed in this
window.
If there are any mistakes in the
configuration, you can go back and
modify the values by clicking on the
button ‘Zurück’.
If you will not start the startup wizard at
the beginning of every EPOS user
interface session, you have to deselect
the option ‘Always start this wizard after
program start’.
Figure 20: Startup wizard configuration
summary
d)
If all settings are correct, click the button
‘Fertig stellen’ to close the startup wizard.
Edition July 2007 / Subject to change
maxon motor control
19
