maxon motor
EPOS Positioning Controller
EPOS 24/1 Getting Started
8.
‘Startup Wizard’ Step 6 for EC motors:
Position Sensor Type
a)
Select the used position sensor type
Figure 16: Startup wizard dialog for choosing
EC motor position sensor type
b)
c)
Click the button ‘Weiter’ for the next step.
Important remarks for using Hall
sensors: For a proper function of the
regulation, please be aware of the
following restrictions.
Figure 17: Recommendations for using Hall
sensors as position sensors
d)
a)
Please consider this warning carefully
before clicking the ‘Accept’ button for the
next step.
8.
‘Startup Wizard’ Step 6 for DC motors:
Position Resolution
Enter the resolution of the used encoder
Figure 18: Startup wizard dialog for setting
DC motor encoder resolution
b)
Click the button ‘Weiter’ for the next step.
18
maxon motor control
Edition July 2007 / Subject to change
