42
PRESS
to RESET
Insert key on control box, turn and
HOLD
(in either direction) to
MOVE
gate.
The
OPTIONAL
external key switch device (sold separately) can open or close the
gate electronically if the switch has been wired to the MC-200 motor controller.
•
The moving gate gets
PUSHED
by a moving
VEHICLE
.
maintenance
electronic gate open / close - Optional
audible alarm
CAUTION:
Keep pedestrians and vehicles clear of the gate while it is moving.
If the Alarm Sounds During Normal Gate Operation:
When the gate encounters
TWO
consecutive obstructions before completing a gate cycle, the alarm will sound and
the gate will
PAUSE
in the position where the second obstruction occurred.
CHECK THE
GATE AREA FOR ANY PROBLEMS BEFORE
pressing the
STOP button
on the Matrix 1
or the externally mounted
Alarm Reset button
to shut off the alarm and reset the gate.
NOTE:
Alarm will automatically shut-off after five minutes but
will not allow
gate to
operate until the
STOP button
is pressed.
Some reasons why the alarm sounds:
INSIDE Property
Gate is Closing
Moving Vehicle is Entering
OUTSIDE Property
Matrix 1
STOP Button
Externally Mounted
Alarm Reset Button
shuts-off alarm.
•
HINGES
are
TOO TIGHT
or
BROKEN
, gate
CANNOT move freely
.
•
Gate is
STUCK
or
BENT
in an awkward position.
•
A
FOREIGN OBJECT
is on the gate frame while the gate is moving.
•
The gate is
TOO HEAVY
.
•
The gate operator tries to close the
gate but
gate gets CAUGHT
on an
object and cannot move.
OPEN
CLOSE
OPEN
STOP
CLOSE
MOTOR MOTION
Alarm Shut-OFF
