Handling, Maintenance, and Repair 2-17
Line oiling
G-36
Inner teeth of cam trigger assembly
B-9 (*)
(One rotation with 1-mm-
diameter grease)
Line oiling
G-36
Supporting point of paper feeding lever
B-10
(Half rotation with 1-mm-
diameter grease)
Line oiling
G-36
Contact point between paper feeding lever and frame assembly
B-11
(1-mm-diameter grease)
Point oiling
G-36
Shaft of paper feeding lever (One side)
B-12
(2-mm-diameter grease)
B-13
B-14
Point oiling
G-36
Groove on cam-oscillation (Two points of the top of cam form)
(Fill the groove with 10-
mm-long grease)
Point oiling
G-36
Contact point between cam-trigger unit and frame assembly
B-15
(Quarter rotation with 1-
mm-diameter grease)
B-16
B-17
B-18
Point oiling
G-36
Retaining ring Type E fixing lever-release (three points)
(Oil the inner side
of the ring)
Point oiling
G-36
Retaining ring type E fixing spool gear assembly
B-19
(Oil the inner side of the
ring)
Contact point between ribbon feeding gear and the frame assem-
B-20
bly
Point oiling
G-36
(1-mm-diameter grease)
Point oiling
G-36
Contact point between lever- release and gear-paper feeding drive
B-21
(2-mm-diameter grease)
Point oiling
G-36
Middle of the motor unit gear
B-22
(1-mm-diameter grease)
Point oiling
G-36
Deceleration point of the motor unit gear
B-23
(1-mm-diameter grease)
Oiling
point
number
Oil type
Oiling point
Method of oiling
(Quantity of oil)
Model M190G Technical Manual
Table 2.4 Oiling Points