Handling, Maintenance, and Repair 2-1
Chapter 2
Handling, Maintenance, and Repair
2.1 HANDLING
2.1.1 Handling the Printer Unit
When the printer is unpacked and transported, consider the following precautions.
Precautions during moving
1) Grasp the frame and the ribbon casset (or the platen of the printer); then lift it out of the box.
Figure 2-1 Handling the Printer
2) Grasp the frame of the printer and the center of the printer cover; then lift it.
3) If the printer is transported by grasping he platen and the circuit board, pay attention to the
following matters:
●
Because the printer uses the electronic devices for reset and timing detection, static
electricity may cause the damage to the printer. To protect against static electricity use one
of the following methods:
· Use a grounded wrist band
· Use an anti-static device
· Use a conductive mat
●
Do not touch the circuit terminals.
PUSH
EJECT
Model M190G Technical Manual
