19
2. Connect the cable
’s 16-pin male adapter to the vehicle’s DLC, which
is generally located under the vehicle dash.
NOTE
The vehicle
’s DLC is not always located under the dash; refer to the user
manual of the test vehicle for additional connection information.
Non-OBD II Vehicle Connection
This type of connection requires both the main cable and a required OBD I
adapter for the specific vehicle being serviced.
To connect to a Non-OBD II Vehicle
1. Connect the main cable
’s female adapter to the Vehicle Data
Connector on the Display Tablet and tighten the captive screws.
2. Locate the required OBD I adapter and connect its 16-pin jack to the
main cable
’s male adapter.
3. Connect the attached OBD I adapter to the vehicle
’s DLC.
NOTE
Some adapters may have more than one adapter or may have test leads
instead of an adapter. Whatever the case, make the proper connection to the
vehicle
’s DLC as required.
Getting Started
Prior to first use of the Diagnostics application, the Display Tablet must be
properly connected to the vehicle
’s DLC.
Vehicle Menu Layout
When the Display Tablet device is properly connected to the vehicle, the
platform is ready to start vehicle diagnosis. Tap on the
Diagnostics
application button on the MaxiCheck MX808 Job Menu, the screen then
opens the Vehicle Menu.
