MaxiCheck MX808 Manual Download Page 17

Page: 17 / 132

Button

Name

Description

Function
Viewer

Configures the unit to operate as an automotive
oscilloscope to perform electrical and electronic
circuit tests and monitor signal activities. See

Function Viewer

The Function Viewer allows you to search
the functions supported by our tools and the
version information. There are two ways of
searching, either by searching the tool and
the vehicle or searching the functions.



To Search by the vehicle

application on the MaxiSys Job
Menu.

The

Function

Viewer

application screen displays.

2. Tap the tool name on the top left to

drop down the tool list, tap the one
you want to search.

3. Tap the vehicle brand, model, and

year you want to search.

4. All the functions support by the

selected tool for the selected
vehicle displays with three column,

Summary of Contents for MX808





































































































































Search results

Summary of Contents for MX808

Reviews:

Brands by name

Popular brands

MaxiCheck MX808, Manual

Search results

Summary of Contents for MX808

Reviews:

Brands by name

Popular brands