background image

53

If you don’t have the card or if your 
address changes, you will find the model 
number, manufacture date, and line code 
on the label located on side of shell.

Example of model number, manufacture date, and line code.

Registration and Safety Notices

Please complete the postage-paid registration card that came 
with your child restraint, and send it to us. Child restraints could 
be recalled for safety reasons. You must register this restraint to 
be reached in a recall. Send your name, address, email address 
if available and the restraint’s model number and manufactur-
ing date to:

Dorel Juvenile Group, Inc.
Consumer Care Department

PO Box 2609
Columbus, IN 47202-2609 
or call 1-800-951-4113 or register online at www.djgusa.com/
registration/carseat/us.
For recall information, call the U.S. Government’s Vehicle Safety 
Hotline at 1–888–327–4236 (TTY: 1–800–424–9153), or go 
to http://www.NHTSA.gov.

Line 

Code

Manufacture 

Date

54

Warranty 

Dorel Juvenile Group, Inc. (DJG) warrants this product to the 
original retail purchaser as follows: 

This product is warranted against defective materials or work-
manship for one year from the date of original purchase. 

An 

original receipt is required to validate your warranty.

 

DJG will, at its option, provide replacement parts or replace this 
product. DJG reserves the right to substitute if the part or model 
has been discontinued.

To make a claim under this warranty write to DJG, Consumer 
Care Department, P. O. Box 2609, Columbus, IN 47202-2609; or 
call 1-800-951-4113 from 8:00 a.m. to 6:00 p.m. EST Monday 
through Thursday and from 8:00 a.m. to 4:30 p.m. on Friday.

 

Proof of purchase is required and shipping charges are 
the responsibility of the consumer.

Warranty Limitations: 

This warranty does not include dam-

ages which arise from misuse or abuse of this product. 

Limitation of Damages: 

The warranty and remedies as set 

forth are exclusive and in lieu of all others, oral or written, 
expressed or implied. In no event will DJG or the dealer selling 
this product be liable to you for any damages, including inciden-
tal or consequential damages, arising out of the use or inability 
to use this product. 

Limitation of warranties and other warranty terms and 
state law rights: 

Any implied warranties, including implied warranties of the mer-
chantability and fitness for a particular purpose, shall be limited 
to the duration and terms of the express written warranty. Some 
states do not allow limitations as to how long an implied war-
ranty lasts or the exclusion or limitation of incidental or conse-
quential damages, so the above limitations may not apply to you. 

This warranty gives you specific legal rights, and you may have 
other rights, which vary from state to state. Neither DJG nor the 

continued on next page

Model 

Number

Summary of Contents for Pria 85 Max

































Reviews: