37
38
8.
Tighten Belt
Place hand in child restraint.
Firmly push child restraint down
and back towards the vehicle seat
back while pulling free end of belt to
tighten.
7.
Buckle Vehicle Belt
6.
You
MUST
Thread Only the
Vehicle Lap Belt into the
Belt Positioning Guides
on Both Sides of the Shell
As Shown
DO NOT
thread the shoulder
portion of the lap/shoulder belt into
the belt positioning guides.
5.
Reach Under Pad and
Pull Vehicle Belt Across
the Shell
Do not twist belt.
Belt
MUST
be
in front of buckle strap.
You
MUST
use the 1st or 2nd
buckle slot. Do not place belt over
child’s legs.
1
2
2.
Place Child Restraint
Rear Facing in Back
Seat
The level line on shell
MUST
be
parallel with the ground.
If needed, you may use position 2
to help achieve the correct recline
angle.
3.
Check if Your Vehicle
Belts Will Work With This
Child Restraint
This is very important because
not all vehicle belts will work
with child restraints.
4.
Route Vehicle Lap or
Lap/Shoulder Belt Through
Rear-Facing Belt Path
Review pages 26-28 and your vehicle owner’s manual to
determine what kind of vehicle belt you have and how to lock a
child restraint in place.
3
continued on next page