43
2.
Route the Connector with
the Adjuster Closest to it
Through the Forward-
Facing Belt Path As Shown
5.
Place Child Restraint
Forward Facing Against
Vehicle Seat Back
Vehicle seat back must be upright.
4.
Recline Child Restraint to
Position 2
3.
Finished Lower Anchor Belt
Routing
44
continued on next page
Lower Anchor Belt Installation
1.
Remove Lower Anchor
Belt from Storage
Location
Or if the lower anchor belt was
used rear facing
, pull it out of the
rear-facing belt path so both
connectors are on the same side
of the seat as shown.
WARNINGS:
Do not use the lower anchors of the child
restraint anchorage system (LATCH system) to attach this
child restraint when restraining a child weighing more
than 40 lbs (18 kg).
The vehicle belt must be used for installation if your child
weighs more than 40 lb (18 kg).
Do not use the lower anchor belt along with the vehicle lap
or lap/shoulder belt.
Check the lower anchor belt before each use. Use only if
the belt can be tightened properly and securely.
Do not fasten multiple lower anchor connectors on the
same lower anchor bar in the vehicle.
Failure to follow these warnings can result in serious
injury or death.
