33
34
10.
Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
If it moves more than 1 in. (2.5 cm),
you can try:
A.
Pulling the belt tighter.
B.
Reinstalling the child restraint.
C.
Changing to a different seating location.
D.
Switching to vehicle belt installation.
9.
Tighten Belt
Place hand in child restraint.
Firmly push child restraint down
and back towards the vehicle seat
back while pulling free end of belt
to tighten.
It may be easier to pull back the
pad and pull the free end of the
belt parallel with the belt path as
shown.
7.
Place Child Restraint
Rear Facing in Back Seat
The level line on shell
MUST
be
parallel with the ground.
If needed, you may use position 2
to help achieve the correct recline
angle.
8.
Attach Lower Anchor
Connector to Vehicle’s
Lower Anchor
Review your vehicle owner’s manual
for lower anchor locations and
lower anchor belt use.
Make sure arrows on connectors
are facing up.
Fasten one lower anchor belt
connector to the anchor located in
the vehicle seat bight.
Repeat for other side of child
restraint.
3
continued on next page
