35
36
Vehicle Belt Installation
WARNINGS:
Do not use the lower anchor belt along
with the vehicle lap or lap/shoulder belt.
Secure the lower anchor connectors
to storage attachments as shown
when installing with vehicle belts.
Store the tether hook when used
rear facing. Attach the tether hook
to storage attachment as shown.
Check the vehicle belt before
each use. Use only if the belt can
be tightened properly and locked
securely in place.
Failure to follow these warnings can
result in serious injury or death.
continued on next page
1.
Fully Recline the Child
Restraint
Pull out on recline handle and push
top of child restraint back.
11.
Secure Child in Child
Restraint
See pages 10-12.
To Release Lower Anchor Belt
Remove child from child restraint.
Remove lower anchor belt from vehicle
anchors by pressing the red release
button on each connector. Then pull it
out of the vehicle seat.
Store lower anchor belt when not in
use. See page 24.
12.
Recheck Level Line
Repeat steps 6-12 if not reclined
correctly.
NOTE:
You may need to place
a large rolled towel(s) or foam
pool noodle(s) under front of
child restraint to help achieve the
correct recline angle.
Check often to be sure padding is
still in place and the belt is tight.
