Maxent 58" Owner'S Manual Download

Page: 9 / 83

Infrared Receiver

Receive IR signal from the remote control.

Status LED

Orange - Standby (Power OFF) with AC

power detected

The LED will illuminate in orange color if the

TV is shut-off but the main power cord is
plugged into•the back of the unit.

Solid Green - Power ON

Receive IR signal from the remote control.

Power (Standby) Button

Turns power on or off from standby mode. There is

a wait period between on or off cycles.

Volume Adjustment Buttons

Use these buttons to adjust volume up and down.

These keys also serve as navigation and adjustment

keys when On Screen Display menu is engaged.

Channel Select Buttons

Use these buttons to select Channel up or down.

Menu Button

Use this button to engage the On Screen Display

menu.

Input Button

Use this button to switch between available inputs.

Getting to Know Your TV

Side Panel Controls

Summary of Contents for 58"




















































































Search results

Summary of Contents for 58"

Reviews:

Related manuals for 58"

Brands by name

Popular brands

Maxent 58", Owner'S Manual

Search results

Summary of Contents for 58"

Reviews:

Related manuals for 58"

Brands by name

Popular brands