7
QM01001-1
Introduction
Warnings, Cautions, and Notices (continued)
►
Use the accessory cable or a designated type cable for the connection.
• If you use a power cord or a signal cable that are not comply with the
specification, it causes fire, electric shock, malfunction, or radio wave
interference.
• Only use the power cord that came with the projector.
• Consult your dealer to properly use connection cables or connectors other than
coming with the projector.
• The power cord that came with the projector is only for this projector. Do not
use it for other devices.
►
Clean the power plug by using a soft and dry cloth.
• If dust or metal adheres to or around the AC (power terminal) of this projector
or the power plug, it may cause fire or electric shock.
►
Insert the power plug into a power outlet firmly.
• Use extra caution when connecting the power cord, as incorrect or faulty
connections may result in fire and/or electrical shock.
• Incorrect power supply could result in fire or electrical shock.
• Be sure to plug the power cord into an outlet that has specified voltage.
• Avoid using a loose, unsound outlet or contact failure.
• Do not distribute the power supply to multiple devices. It may overload the
outlet and connectors, loosen the connection, or result in fire, electric shock or
other accidents.
►
Be sure to connect with ground wire.
• Connect the ground terminal of AC inlet of this unit with the ground terminal
provided at the building using the correct power cord; otherwise, fire or electric
shock can result.
• If you connect the ground wire to the outlet, it may cause fire or electric shock.
WARNING
(continued on next page)
