28
QM01001-1
Connecting to a power supply
1.
Put the connector of the power cord into the
AC
(AC inlet) of the projector.
2.
Firmly plug the power cord’s plug into the outlet.
In a couple of seconds after the power supply
connection, the
POWER/STATUS1
indicator will
light up in steady orange.
►Please use extra caution when connecting the power cord, as
incorrect or faulty connections may result in fire and/or electrical shock.
• Do not touch the power cord with a wet hand.
• Only use the power cord that came with the projector. If it is damaged, consult
your dealer to get a new one. Never modify the power cord. The power cord
that came with the projector is only for this projector. Do not use it for other
devices.
• Only plug the power cord into an outlet whose voltage is matched to the power
cord. The power outlet should be close to the projector and easily accessible.
Unplug the power cord for complete disconnection.
• Do not distribute the power supply to multiple devices. It may overload the
outlet and connectors or loosen the connection. A loose connection in the plug
could result in burns or accidents due to heat generation of the plug.
• Do not place the projector or heavy objects on the power cord and cables.
• Connect the ground terminal for the AC inlet of this unit to the ground terminal
of the building using an appropriate power cord (bundled).
• Do not use the power cord remaining tied together. It could result in high
temperature, fire and smoke.
WARNING
Please remember that when the DIRECT POWER
ON function is activated (
71
), the connection of the
power supply makes the projector turn on.
When the AUTO POWER ON function is activated and
the projector is receiving an input signal, it is turned on
by connecting to the power supply (
71
).
►This product is also designed for IT power systems with a phase-to-
phase voltage of 220 to 240 V.
NOTICE
Setting up
AC
Power cord
POWER/STATUS1
indicator
