22
QM01001-1
Setting up
Arrangement (continued)
• Do not place the projector in a smoking area, kitchen, passageway
or by the window.
• Position the projector to prevent light from directly hitting the projector's remote
sensor.
• Positional deviation or distortion of a projected image, or shift of the focus
may occur due to ambient conditions, and so on. They tend to occur until the
operation becomes stable, especially within about 30 minutes after the light
source is turned on. Check and readjust them as necessary.
• Do not place the product in a place where radio interference may be caused.
Any interfering radiation could cause disordered image or noises. Avoid radio
generator such as a mobile telephone, transceiver, etc. around the projector.
• Keep heat-sensitive things away from the projector. Otherwise, they may be
damaged by the heat from the projector.
NOTICE
• When the ambient temperature is around 35 to 40°C, the brightness
of light source is reduced automatically.
NOTE
