66
QM01001-1
SCREEN menu
Item
Description
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an
unsuitable signal is detected.
MyScreen
ó
ORIGINAL
ó
OFF
MyScreen : Screen can be registered by the MyScreen item (
66
).
ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the AUTO BLANK screen (
65
) after several
minutes.
• When the ON is selected to the MyScreen PASSWORD item in the
SECURITY menu (
80
), the START UP is fixed to MyScreen.
MyScreen
This item allows you to capture an image for use as a MyScreen
image which can be used as the BLANK screen and START UP
screen. Display the image you want to capture before executing the
following procedure.
Selecting this item displays a dialog
titled “MyScreen”. It will ask you if
you start capturing an image from the
current screen.
Please wait for the target image to be displayed, and press the
ENTER
or button to start registration.
To restore the screen and return to the
previous dialog, press the
RESET
button
on the remote control.
Registration may take several minutes.
When the registration is completed, the registered screen and the
following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.”
• This function cannot be selected when the ON is selected to the
MyScreen Lock item (
67
).
• This function cannot be selected when the ON is selected to the
MyScreen PASSWORD item in SECURITY menu (
80
).
•
This function is unavailable for a signal from the
HDMI
port.
(continued on next page)
