Maxcess Fife Polaris DP-20, User Manual

Page: 8 / 65

DP-20 WEB GUIDE CONTROLLER USER MANUAL
www.maxcessintl.com DP-20 MI 1-862 1 F
2
2-2
Features of the LCD Panel
LINE 1 This line contains the menu number. This number may contain
2 or more digits. The first digit indicates the current operation mode. The
second digit indicates the current sensor mode. The subsequent digits
indicate the current Setup Menu (when applicable). See “SETUP MENU
STRUCTURE“ for more information on the menu number.
LINE 1
When the letter “X“ preceeds the menu number, this indicates
that the selected menu is password protected. When an attempt is made
to enter this menu, a password will be requested. The correct password
must be entered before access to this menu is allowed.
LINE 1 While in Servo-Center mode, the symbol of the current sensor
selection is displayed in this line.
LINE 1 While in the setup menus, the symbol of the current sensor
selection is displayed in this line.
LINE 1 A command present on the Digital I/O is indicated by an asterisk
in this line.
LINE 1 An External Lock command present on the Digitital I/O is
indicated by an asterisk surrounded by parentheses in this line.
LINE 1 An unrecognized command present on the parallel port is
indicated by a question mark in this line.
LINE 1 While in any of the setup menus, a flashing dot (see arrow) in
this line indicates that a timer is running. The DP-20 is waiting for a
response from the operator. If no response is detected in 3 minutes, the
unit will return to the Operator Level. If this dot is not flashing, no timer is
active.
× 3A.2.3.1
SETUP (MAN)
GUIDE POLARITY
+
× 2A
SERVO CENTER
~ƒ -ãããããÜÜÜÜÜ+
×Ø 2C.1.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%
* 1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
× X3A.2.3.1
SETUP (MAN)
GUIDE POLARITY
+
? 1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
(*) 1A
AUTOMATIC
× -ãããããÜÜÜÜÜ+
×Ø 2C.1.1
SETUP (SC)
~ƒ GAIN
ãÜÜÜÜÜÜÜÜÜ 5.0%