Maxcess Fife Polaris DP-20, User Manual

Page: 12 / 65

DP-20 WEB GUIDE CONTROLLER USER MANUAL
www.maxcessintl.com DP-20 MI 1-862 1 F
3
3-2
Setup Menu Chart
AUTOMATIC MODE
1X.1 1X.2 1X.3 1X.4
Gain Guide Point Measurement Exit Menus
SERVO-CENTER MODE
2X.1 2X.2 2X.3 2X.4
Servo-Center
Gain
Servo-Center
Guide Point
Measurement Exit Menus
MANUAL MODE
SELECT MENU
3X.1 3X.2 3X.3 3X.4 3X.5 3X.6
BASIC SPECIAL ADVANCED LANGUAGE CUSTOM Exit Menus
BASIC MENUS
3X.1.1 3X.1.2 3X.1.3 3X.1.4 3X.1.5 3X.1.6 3X.1.7 3X.1.8 3X.1.9
►
Gain Guide Point
Guide
Polarity
Calibration Auto Setup
Servo-Center
Gain
Servo-Center
Polarity
Measurement
Exit
Menus
SPECIAL MENUS
3X.2.1 3X.2.2 3X.2.3 3X.2.4 3X.2.5 3X.2.6 3X.2.7 3X.2.8 3X.2.9
►
Deadband
Set Operation
Mode Enable
Set Sensor
Mode Enable
Set Jog
Enable
Set Jog
Polarity Set
Jog Speed
Set
Sensor Type
LCD
Contrast
Exit
Menus
ADVANCED MENUS
3X.3.1 3X.3.2 3X.3.3 3X.3.4 3X.3.5 3X.3.6 3X.3.7 3X.3.8 3X.3.9
►
Restore
Settings
Backup
Settings
Set
Password
Set Output
A Delay
Set Output
B Delay
Loss of Null
Output Range
Digital I/O
(X3)
Test Signals
Exit
Menus
LANGUAGE MENU
3X.4.1
►
Select
Language
CUSTOM MENUS
3X.5.1 3X.5.2 3X.5.3 3X.5.4
►
ASC Control
Set ASC
Limits
Set ASC
Source
Exit Menus
MEASUREMENT SUBMENUS
1X.3.1
2X.3.1
3X.1.8.1
1X.3.2
2X.3.2
3X.1.8.2
1X.3.3
2X.3.3
3X.1.8.3
1X.3.4
2X.3.4
3X.1.8.4
1X.3.5
2X.3.5
3X.1.8.5
1X.3.6
2X.3.6
3X.1.8.6
1X.3.7
2X.3.7
3X.1.8.7
1X.3.8
2X.3.8
3X.1.8.8
1X.3.9
2X.3.9
3X.1.8.9
Sensor Signal
Edge L (X5) or
Line C (X4)
Sensor Signal
Edge R (X4) or
Line E (X4)
Sensor Signal
Servo-Center
(X2)
Tach Signal
Motor
Type
Digital
Inputs Firmware
Version
Serial
Number
Exit Menus
TEST SIGNALS SUBMENUS
3X.3.8.1 3X.3.8.2 3X.3.8.3 3X.3.8.4
Sensor Current
Toggle
Outputs
Guide Test
Mode
Exit Menus
Notes:
1.
The ‘X’ in the Menu Number may be A, B, C, D, or E, depending on the sensor mode.
2. The highlighted menus are, by default, password protected if a password has been set.
3.
The text on the LCD Panel may vary slightly from the text in this chart.