Maxcess Fife Polaris DP-20, User Manual

Page: 54 / 65

DP-20 WEB GUIDE CONTROLLER USER MANUAL
www.maxcessintl.com DP-20 MI 1-862 1 F
6
6-34
3X.5.2, Set ASC Limits
This procedure is used to set the ASC Limits. These limits are configurable
for each sensor mode. Use the “ASC CONTROL“ menu to enable the ASC
function.
1. Press the SETUP key to enter the Setup Menus.
The SELECT MENU screen will be displayed.
2. Use the ARROW keys to scroll until CUSTOM
is displayed on line 4.
3. Press the ENTER key to enter the Custom
Menus. The ASC CONTROL menu will be
displayed.
4. Use the ARROW keys to scroll until SET ASC
LIMITS is displayed on line 3. The current ASC
Limit values are displayed on line 4.
5. If necessary, press the SENSOR key to select
the desired sensor mode.
6. Press the ENTER key to enter the SET ASC
LIMITS menu. The negative ASC Limit value will
begin flashing.
7. Use the ARROW keys to adjust the negative
ASC limit value, if desired. Press both ARROW
keys simultaniously to reset the negative ASC
value to the default (-90%), if desired.
8. Press the ENTER key to switch to the positive
ASC limit value, or press the MANUAL key to
abort the procedure. If the MANUAL key is
pressed, any changes to the ASC Limit values
will be discarded and the system will exit the
setup menus, and return to the Operator Level.
9. If the ENTER key was pressed in step 8, use the
ARROW keys to adjust the positive ASC limit
value, if desired. Press both ARROW keys
simultaniously to reset the positive ASC value
to the default (+90%), if desired.
× 3A.5.2
SETUP (MAN)
SET ASC LIMITS
-90.0% +90.0%
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-90.0% +90.0%
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-80.0% +90.0%
× 3A.5.1
SETUP (MAN)
ASC CONTROL
OFF
3B
MANUAL
Ø -ãããããáÜÜÜÜ+
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-80.0% +80.0%
Ø 3B.5.2.1
SETUP (MAN)
SET ASC LIMITS
-80.0% +75.0%
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.5
SETUP (MAN)
SELECT MENU
CUSTOM
Ø 3B.5.2
SETUP (MAN)
SET ASC LIMITS
-90.0% +90.0%