background image

5

DO NOT USE IN THE RAIN

Using the compressor in these or similar condi-
tions will increase the risk of electric shock, dan-
gerous malffunction, and overheating.

1.

WEAR SAFETY GLASSES OR GOGGLES

Danger to the eyes always exists due to the possibility of 
dust being blown up by the exhausted air or of a fastener fly-
ing up due to the improper handling of the tool. For these 
reasons, safety glasses or goggles shall always be worn 
when operating the tool.
The employer and/or user must ensure that proper eye pro-
tection is worn. Eye protection equipment must conform to 
the requirements of the American National Standards Insti-
tute, ANSI Z87.1 (Council Directive 89/686/EEC of 21 DEC. 
1989) and provide both frontal and side protection.
The employer is responsible to enforce the use of eye pro-
tection equipment by the tool operator and all other person-
nel in the work area.

NOTE:

 Non-side shielded spectacles and face shields 

alone do not provide adequate protection.

2.

EAR PROTECTION MAY BE REQUIRED IN SOME ENVI-
RONMENTS

As the working condition may include exposure to high noise 
levels which can lead to hearing damage, the employer and 
user should ensure that any necessary hearing protection is 
provided and used by the operator and others in the work area.

1. SAFETY INSTRUCTIONS

PRECAUTIONS ON USING THE COM-

PRESSOR

IMPORTANT INFORMATION

Most accidents that result from compressor op-
eration and maintenance are caused by the fail-
ure to observe basic safety rules or precautions. 
An accident can often be avoided by recognizing 
a potentially hazardous situation before it occurs, 
and by observing appropriate safety procedures.
Basic safety precautions are outlines in the 
"SAFETY" section of this Instruction Manual and 
in the sections which contain the operation and 
maintenance instructions.
Hazards that must be avoided to prevent bodily 
injury or machine damage are identified by 
WARNINGS on the compressor and in this In-
struction Manual.
Never use this compressor in a manner that has 
not been specifically recommended by manufac-
turer, unless you first confirm that the planned 
use will be safe for you and others.

DEATH OR SERIOUS BODILY INJURY COULD 
RESULT FROM IMPROPER OR UNSAFE USE OF 
COMPRESSOR, TO AVOID THESE RISKS, FOL-
LOW THESE BASIC SAFETY INSTRUCTIONS.
HIGH PRESSURE COMPRESSO PROVIDES 
BOTH HIGH PRESSURE AND REGULAR PRES-
SURE AIR. FOR USAGE OF HIGH PRESSURE 
AIR, HIGH PRESSURE COMPRESSOR IS DE-
SIGNED ONLY FOR MAX POWERLITE NAILERS 
AND POWERLITE HOSE. UNSPECIFIED USAGE 
WILL CAUSE SERIOUS ACCIDENTS.

TO AVOID SEVERE PERSONAL INJURY 
OR PROPERTY DAMAGE
BEFORE USING THE TOOL, READ CARE-
FULLY AND UNDERSTAND THE FOLLOWING
"SAFETY INSTRUCTIONS":
FAILURE TO FOLLOW WARNINGS COULD 
RESULT IN DEATH OR SERIOUS INJURY.

WARNING

Summary of Contents for Power Life AKHL1250E




















Reviews: