background image

9

2. SPECIFICATIONS AND TECHNICAL DATA

1. SPECIFICATIONS

3. INSTRUCTIONS FOR OP-

ERATION

Unpack the compressor and check for any defi-
ciency, damage caused during transportation 
and loose bolts and screws.

READ SECTION TITLED " SAFETY INSTRUC-
TIONS "
WEAR SAFETY GLASSES OR GOGGLES

Danger to the eyes always exists due to the pos-
sibility of dust being blown up by the exhausted 
air or of a fastener flying up to the improper han-
dling of the tool. For these reasons, safety glass-
es or goggles shall always be worn when 
operating the tool. 
The employer and/or user must ensure that 
proper eye protection is worn. Eye protection 
equipment must conform to the requirements of  
Council Directive 89/686/EEC of 21 DEC. 1989 
(the American National Standards Institute. 
ANSI Z87.1) and provide both frontal and side 
protection.

NOTE:

Non-side shielded spectacles and face 
shields alone do not provide adequate 
protection.

NOTE:

The information contained in this Instruc-
tion Manual is designed to assist you in 
the safe operation and maintenance of 
the compressor.
Some illustrations in this Instruction 
Manual may show details or attach-
ments that differ from those on your own 
compressor.

1. INSTALLATION

1. NEVER USE THE MACHINE IN A PLACE 

WHERE ANY VOLATILE COMBUSTIBLE 
SUBSTANCE HAS BEEN STORED.

Never use it near gasoline, thinner, gas, 
paint or adhesive agent, because they could 
be ignited or blow up.

2. NEVER USE THE MACHINE NEAR THE 

HEAT OF FIRE OR ANY COMBUSTIBLE 
SUBSTANCE.

Product No.

AKHL1250E (UK)

Weight

18.8 kg

Power supply

AC 110V±10% 50Hz±1% 

φ

1

Rated current

12A

Motor power

2HP

Protective earthing

Class I 

Protective structure

IP20

Working temperature

0°C to +40°C

Working humidity

85 % RH or less. No dew condensation.

Height above sea level

Up to 1,000 m

Storage temperature

-10 to +50°C

Storage humidity

85 % RH or less. No dew condensation.

Pressure switch working range

Off:34bar/On:30bar (POWER MODE)
Off:29bar/On:25bar (NORMAL MODE)

WARNING

WARNING

WARNING

Summary of Contents for Power Life AKHL1250E




















Reviews: