15
ENGLISH
ground the place where the mark on the tire touches the
ground.
- Measure the distance (Ø) between these two points in
millimeters.
13.2
Use the left button to select screen 3 (ATM).
Hold down the right button for more than 4 seconds. The bike
number flickers and the CIR display appears. If necessary,
use the left button to modify the bike number (1, 2 or H), then
validate with the right button.
13.3
The default value 2105 appears, and the digit on the
extreme left flickers. Enter the distance you have already
measured (in millimeters), by modifying the flickering digit with
the left button, then validate with the right.
When you have set the
circumference, validate with the
right button.
13.4
Then use the left button to
select the distance unit (Miles
or Kilometers). Validate with the
right button.
If required, repeat the operation
for bike 2.
conds.
idate with the
t button to set
R
R
12. SETTING THE ODOMETERS
12.1
Use the left button to select screen 4 (ODO).
Hold down the right button for more than 4 seconds. The bike
number flickers. If necessary, use the left button to modify the
bike number
(1, 2 or H), then
validate with the
right button.
12.2
Then set the
odometer for the
bike selected: use
the left button
to modify the
flickering digit,
then validate and
move on to the
next digit with the
right button. When
you have set the
odometer, use
the right button to
validate.
12.1
R
4 sec.
L
R
13.3
L
R
R
13.4
L
R
12.2
L
R
R
13. SETTING THE CIRCUMFERENCE
AND THE UNIT
13.1
Consult the table of approximate correspondences to
check your wheel circumference (see table 13.1).
For a more precise
measurement, proceed as
follows:
- Make a mark on the tire
and on the ground at the
point of contact between
the tire and the ground.
- Do one full turn of the
wheel and mark on the
Tyre
Ø
Tyre
Ø
26’’x1,5
2020
700Cx19
2100
26’’x1,75
2070
700Cx20
2110
26’’x1,9
2090
700Cx23
2130
26’’x2,0
2110
700Cx25
2140
26’’x2,1
2130
700Cx28
2150
26’’x2,2
2150
700Cx32
2170
26’’x2,3
2170
650Cx19
1930
650Cx23
1990
13.1
13.2
R
4 sec.
R
flicker. Turn the
are using the
. When both
ght button to
wintech-esbolt bis.indb 15
wintech-esbolt bis.indb 15
20/03/07 12:34:20
20/03/07 12:34:20
Cyan quadriMagenta quadriJaune quadriNoir quadri
