14
ENGLISH
10.1
Use the right button to select screen 1 (DST).
Hold down the right button for more than 4 seconds.
The bike number (BK 1) flickers. Use the left button to select
the number of the bike chosen: BK 2 for a second bike, BK H
for the home-trainer sensor (see the user guide for the Home-
Trainer kit for further explanations on its use).
Briefly press the right button to validate.
10. PAIRING THE SECOND BIKE
Your Wintech computer can be paired with two speed sensors
simultaneously, thus enabling you to use the same computer
on a second bike or with a pair of training wheels. Similarly,
your Wintech computer can recognize a sensor that is
specially designed for the Home-Trainer.
Once the extra sensors have been paired, your computer
will know which sensor is sending messages to it and
will automatically adjust to the parameters of the bike
used without any intervention on your part. To use this
characteristic, you must have the second bike kit, ref. 995 239
01, or the Home-Trainer kit, ref. 995 240 01, which are sold
separately.
11. SETTING THE TIME
Use the right button to select screen 2 (CLK).
Hold down the right button for more than 4 seconds.
The tens of hours digit flickers.
Use the left button to set the tens of hours. Validate with the
right button. The next digit flickers. Use the left button to set
the hours and validate with the right button.
Set the minutes in the same way.
R
R
4 sec.
R
L
R
L
R
R
R
4 sec.
10.1
L
R
12. SETTING
12.1
Use the le
Hold down the
number flickers
bike number
(1, 2 or H), then
validate with th
right button.
12.2
Then set t
odometer for th
bike selected: u
the left button
to modify the
flickering digit,
then validate an
move on to the
next digit with t
right button. W
you have set th
odometer, use
the right button
validate.
11
13. SETTING
AND THE
13.1
Consult th
check your whe
For a more prec
measurement,
follows:
- Make a mark
and on the gro
point of conta
the tire and th
- Do one full tur
wheel and ma
10.2
10.2
The speed (0.0) and pedaling cadence (0) flicker. Turn the
front wheel until the speed is displayed (if you are using the
pedaling cadence option, turn the cranks also). When both
speed and cadence are displayed, press the right button to
validate.
The sensor pairing is now complete.
wintech-esbolt bis.indb 14
wintech-esbolt bis.indb 14
20/03/07 12:34:19
20/03/07 12:34:19
Cyan quadriMagenta quadriJaune quadriNoir quadri
