MATTHIESEN Magic Finger Bagger, Owner'S Manual

Page: 22 / 85

Troubleshooting Chart
Symptom Possible Causes(s) Corrective Action
Unit fails to operate 1. Blown fuse or open circuit 1. Replace fuse or reset circuit breaker
breaker to motor
2. No power to motor 2. Contact power company
3. Defective motor 3. Repair or replace
Unit operational but no output Defective gear(s) in reducer Check and replace if necessary
Intermittent rotation of output shaft Damaged gear assembly possibly Replace gear and if possible, avoid
caused by shock load shock load
Excessive noise 1. Bearings worn 1. Replace
2. Belt too tight 2. Adjust tension
3. Overhung Load - exceeds rating 3. Correct load and/or replace bearing
and causes bearing wear
4. Cover loose due to vibration and 4. Correctly tighten cover screws to 10 ft-lbs
causing excess bearing free play. torque
Dayton Operating Instructions and Parts Manual
®
5
Models 2Z306F thru 2Z310F
22