TI008G0001
6.01
How to Use the Machine
Foreword
The user should appoint a qualified
person for operation and maintenance
of the machine.
He should properly train all operators, so
that they are acquainted with all needed
measures to prevent any accident or
injury to people.
All start and stop procedures as well as
emergency ones should be known; they
should be also periodically checked with
the operators.
The operating and maintenance manual should be always available;
in case of loss or damage, further copies can be purchased from
Mattei’s sales organisation.
Checks before start
Before starting the machine, ensure that:
the electrical system complies with voltage and power of the
machine and that wires are of suitable section;
the machine is earth connected and protected against possible
short circuits;
the mains isolator is installed near the machine;
the machine oil level is correct. When the machine is still
and without pressure in the chamber, the oil level should be
between the MIN and MAX levels shown on the indicator. If the
level is insufficient, fill it up with suitable oil and of the same type
as the one used;
the machine is connected to the compressed air system.
900
