Matrox Veos – User Guide
17
Problem
Wrong color balance, screen image off-center, or no picture at all
1
Cause
Your computer may be turned off.
1
Solution
Make sure your computer is turned on.
2
Cause
The power saving settings on your computer or monitor may not be properly set.
1
Solution
Adjust the power saving settings on your computer or monitor.
3
Cause
Your Matrox product may not be properly connected.
1
Solution
Make sure your Matrox product is properly connected and that all connectors are properly
fastened. For more information,
see “Connection setup”, page 4
4
Cause
Your secondary display may not be enabled in Windows.
1
Solution
Make sure your display is enabled:
Windows 2000/XP
–
1
Right-click your Windows desktop background, then click
Properties
Æ
Settings
.
2
Select any disabled display, enable the
Extend my Windows desktop onto this monitor
check box, then click
Apply
.
Windows Vista
–
1
Right-click your Windows desktop background, then click
Personalize
Æ
Display
Settings
.
2
Select any disabled display, enable the
Extend the desktop onto this monitor
check box,
then click
Apply
.
2
Solution
If no secondary display is available in Windows, your secondary display may not be enabled
on your system. For more information on how to enable your secondary display, see your
system or graphics hardware documentation.
5
Cause
You may be using different types of monitors.
1
Solution
To get the most out of your Matrox Veos product, we recommend you use identical
monitors (that is, monitors that support the same settings such as display resolution, refresh
rate, and aspect ratio). For more information on the settings your monitor supports, see your
monitor documentation.
6
Cause
Your monitor video controls may be improperly set.
1
Solution
Adjust your monitor controls (brightness, contrast, and so on). For more information, see
your monitor manual.
