Matrox Veos – User Guide
11
To connect your Repeater unit to another
Veos unit (Display or Repeater), connect a
second coaxial cable to the output coaxial
connector (
) on your Repeater unit.
2
Connect the twisted pair cable
Plug one end of your twisted pair cable into
the RJ-45 input jack on your Repeater unit.
Plug the other end of your twisted pair cable
into a PoE (Power Over Ethernet) power
supply unit (sold separately), then plug the
PoE power cord into your power supply.
To power another Repeater unit, plug one
end of your twisted pair cable into the RJ-45
output jack on your Repeater unit. Plug the
other end of your twisted pair cable into the
RJ-45 input jack on the next Repeater unit.
3
Check the indicator light
If the indicator light is on (green or red),
your Repeater unit is properly connected.
If the indicator light is off (black), make sure
your Repeater unit is properly connected
and that all connectors are properly
fastened. For more information,
“Description of indicator lights”, page 12
Your Matrox product is now connected. Restart your computer and install your Matrox software (
Output coaxial
cable
Input twisted
pair cable
Output twisted
pair cable
Indicator light
