Advanced menu 95
Boot Configuration submenu
The
Boot Configuration
submenu allows you to configure boot settings.
Peripheral Configuration submenu
The
Peripheral Configuration
submenu allows you to configure the controllers
related to various peripheral devices that are connected to Matrox 4Sight GPm.
Item
Meaning
Options
SCU resolution
This item allows you to change the resolution of the setup utility.
640 x 480
800 x 600
1024 x 768*
Numlock
This item allows you to turn NumLock mode on and off. The state of Numlock mode determines whether the
numeric keys or the cursor (arrow) keys on the keypad are active after bootup.
The
On
option causes the numeric keys on the keypad to be active. The
Off
option causes the arrow keys on
the keypad to be active.
Note that this item is only an initial setting. After bootup, you can activate or deactivate the numeric keys on
the keypad by pressing the numlock key on the keyboard.
Off
On*
Device Detection Delay
These items allow you to set a delay when detecting devices from which to boot. Matrox 4Sight GPm will
wait a set amount of time before attempting to detect devices.
Disabled*
250 ms
500 ms
1 s
2 s
Item
Meaning
Options
Serial Port A Mode
This item allow you to select the mode of Serial port A.
RS-232*
RS-485
Azalia
This item allows you to enable or disable the Intel High Definition Audio (HDA) controller.
By selecting
Disabled,
the audio controller will always be disabled.
By selecting
Enabled,
the audio controller will always be enabled.
Disabled
Enabled*
Summary of Contents for 4Sight GPm
