Pinout descriptions of external connectors 73
Front panel connectors
The following connectors are on the front panel of your unit:
- One auxiliary I/O terminal-block connector.
- Two serial port connectors (one RS-232 COM port connector and
terminal-block, and one RS232/485 COM port connector).
- Audio output (top) and audio input (bottom) connectors.
- One power connector (DC header).
Auxiliary I/O terminal-block connector
The auxiliary I/O connector is a terminal-block type connector. The diagram
depicts the mating terminal-block connector latch already installed in the
terminal-block connector of your unit.
Pin
Hardware signal name
MIL constant for
auxiliary signal
Description
IN1 -
GND
Ground.
IN1+
AUX(USER)_TTL_IN1
M_AUX_IO8
TTL auxiliary signal (input), which supports
user input or quadrature input.
IN2 -
GND
Ground.
IN2+
AUX(USER)_TTL_IN2
M_AUX_IO9
TTL auxiliary signal (input), which supports
user input or quadrature input.
IN3 -
GND
Ground.
IN3+
AUX(USER)_TTL_IN3
M_AUX_IO10
TTL auxiliary signal (input), which supports
user input or quadrature input.
IN4 -
GND
Ground.
I
nput
Output
1
2
3
4
5
6
7
8
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
1
2
3
4
5
6
7
8
Summary of Contents for 4Sight GPm
