Matrox 4Sight GPm Installation And Hardware Reference Download

Page: 132 / 174

132 Appendix D: Matrox 4Sight GPm (Bay Trail) BIOS reference

Total Memory

This item reports the total RAM installed, in Mbytes.

Channel A

This item reports the amount of RAM installed in the first slot on the motherboard, in Mbytes. If memory is
not installed, it is reported as

[Not Installed].

Channel B

This item reports the amount of RAM installed in the second slot on the motherboard, in Mbytes. If memory
is not installed, it is reported as

[Not Installed].

Platform firmware information

This item reports computer information, including the processor stepping, memory reference code revision,
firmware versions, video BIOS versions, mini-card revision, and CPU family.

Language

This item allows you to specify the language used by the BIOS; only English is an available option.

System Time

This item allows you to change the time in HH:MM:SS format:

• To alternate between fields, press the

Enter

key.

• To increase the value of each field by 1, press the + key.

• To decrease the value of each field by 1, press the - key.

You can also set the hour, minute, and second fields by typing in their values.

HH:MM:SS

System Date

This item allows you to change the date in MM/DD/YYYY format:

• To alternate between fields, press the

Enter

key.

• To increase the value of each field by 1, press the + key.

• To decrease the value of each field by 1, press the -

key.

You can also set the month, date, and year fields by typing in their values.

MM/DD/YYYY

Item

Meaning

Options

Summary of Contents for 4Sight GPm















































































































































































Search results

Summary of Contents for 4Sight GPm

Reviews:

Related manuals for 4Sight GPm

Brands by name

Popular brands

Matrox 4Sight GPm, Installation And Hardware Reference

Search results

Summary of Contents for 4Sight GPm

Reviews:

Related manuals for 4Sight GPm

Brands by name

Popular brands