Matrix T7XE-01, Service Manual

Page: 81 / 91

77
10.3 ASSEmbly inSTRuCTionS
ATTEnTion
After assembly and installation is complete, the treadmill will need to be calibrated using the auto-calibration procedure outlined in Section 3.5.
do NoT stand on the belt while the auto-calibration sequence is in progress.
Prior to assembling the treadmill, unpack all of the contents of the box and make sure that all necessary components are present. Review the
contents of the hardware package for completeness. Contact Matrix customer service at 866.693.4863 to report any missing items.
ASSEmbly inSTRuCTionS
Please make sure that the power cord is not plugged into the wall outlet while completing the following procedure.
To ensure correct assembly of the treadmill, carefully read and follow these steps:
Remove the motor cover(s) and set aside. The motor cover(s) need
to be removed to gain access to the motor compartment so that wire
harness
connections can occur.
Open Black Assembly Bag. Assemble both the left and right console
masts to the treadmill base using item 10 socket head cap screw and
item 14 washer.
STEP 1
STEP 2
ChapTEr 10: TrEadmill SpECifiCaTioNS aNd aSSEmbly GUidE