Matrix T7XE-01, Service Manual

Page: 25 / 91

21
ChapTEr 6: ENGiNEEriNG modE
1) To enter Engineering Mode, press "ENTER 2001 ENTER" on the number keypad and
Engineering mode will
appear on the display.
2) Engineering Mode is divided into 5 tabs, located on the left side of the screen. They are Calibration, Statistics, Errors, Clubs, and Club ID.
3) Choose a tab by touching the screen over the desired tab.
4) Each of the tabs have options that will appear once you have chosen that particular tab.
5) Press
the "HomE" button or the EmERGEnCy SToP
to exit Engineering Mode..
6.1 uSinG EnGinEERinG modE