32
9.1 moTor CoVer rePlaCemeNT
1) Remove the 2 screws holding the motor cover to the frame using a 6 mm Allen wrench (Figures A).
2) The motor cover is secured to the frame with velcro, so you will have to pull up with some force (Figure B).
3) Figure C shows the motor area with the cover removed.
4) Reverse Steps 1-2 to install a new motor cover.
NOTE:
When reinstalling the motor cover, be sure to tuck the sides in so they do not bow
outward (Figure D).
fiGUre a
fiGUre b
fiGUre C
fiGUre d
CHaPTer 9: ParT rePlaCemeNT GUide
