12
1) To enter Manager Mode, press & hold INCLINE DOWN and
SPEED DOWN keys at the same time for 3-5 seconds until Manager
appears on the display.
2) To enter the Manager Mode, press ENTER once Manager Mode
appears on the display (Figure A).
3) To scroll between settings in the Manager Mode, press the
INCLINE or SPEED keys.
4) Press ENTER to modify the settings once displayed.
5) Press any INCLINE or SPEED key to change the value of the set-
ting.
6) Press the PAUSE key to exit the setting without saving.
7) Once the setting is correct, press ENTER to save.
8) Press the EMERGENCY STOP to exit Manager Mode..
5.1 USiNG maNaGer mode
fiGUre a
CUSTom
SeTTiNGS
defaUlT
miNimUm
maximUm
UNiT
DESCRIPTION
MAXIMUM TIME
60
5
99
MINUTE
Maximum workout duration.
DEFAULT TIME
20
5
99 (limited to max
time setting)
MINUTE
Default start time in all programs.
DEFAULT LEVEL 1
1
10
LEVEL
Default start level in all programs.
DEFAULT AGE
30
15
100
AGE
Default age used in HR programs.
DEFAULT
WEIGHT
150 LB / 68
KG
50Lb/23KG
400Lb/182KG
POUND /
KILOGRAM
Default weight used in calorie calculations
and HR programs.
ACCUMULATED
DISTANCE
N/A
N/A
65,000 MILES /
104,000KM
MILE/KILOMETER
Total distance on treadmill, not editable. TO
RESET: Press and hold INCLINE DOWN and
SPEED DOWN for 3-5 seconds.
ACCUMULATED
TIME
N/A
N/A
65,000 HOURS
HOUR
Total time on treadmill, not editable. TO
RESET: Press and hold INCLINE DOWN and
SPEED DOWN for 3-5 seconds.
SOFTWARE
N/A
N/A
N/A
N/A
Software Version, not editable.
START SPEED
0.5 MPH /
0.8KPH
0.5 MPH / 0.8
KPH
2.0MPH/3.2KPH
MPH/KPH
Controls the starting speed for all programs
(does not affect minimum speeds).
MAXIMUM
SPEED
12 MPH / 20
KPH
2.0 MPH / 3.2
KPH
12MPH/20KPH
MPH/KPH
Controls the maximum speed for all
programs.
TIMER MODE
DOWN
DOWN
UP
N/A
Controls whether the user time counts up or
down.
SPEED MODE
MILE
MILE
KILOMETER
N/A
Measurement unit used for calorie
calculations, distance, and speed.
OUT OF ORDER OFF
OFF
ON
N/A
Locks the machine.
GENDER
MALE
MALE
FEMALE
N/A
Sets the user's gender.
LANGUAGE
ENGLISH
N/A
N/A
N/A
Sets the language shown on the console.
SOUND MODE
ON
ON
OFF
N/A
Controls whether the display broadcasts
chime when buttons are pressed.
BELT STOP
OFF
OFF
30, 60, OR 90
SECONDS
SECONDS
This option checks for a user on the running
belt. If there is no user detected, the unit will
go into pause mode, and reset if no user for
5 minutes.
NAVY TEST
SITE
0
0
1
N/A
0 : Test site elevation less than 5000 ft above
sea level.
1 : Test site elevation greater than 5000 ft
above sea level.
HRT SPEED
BASED
OFF
ON
OFF
N/A
This option allows the user to choose speed
based type in setup screen of target heart
rate program.
5.2 maNaGer mode oVerVieW
CHaPTer 5: maNaGer mode