14
7.1 USiNG SerViCe mode
1) To enter Service Mode, press & hold the INCLINE DOWN and
SPEED DOWN keys at the same time for 3-5 seconds until Manager
Mode appears on the display.
2) Press the INCLINE or SPEED keys until Service Mode appears on
the display (Figure A) and press ENTER.
3) To scroll between settings in the Service Mode, press the INCLINE
or SPEED keys.
4) Press ENTER to modify the settings once displayed.
5) Press any INCLINE or SPEED key to change the value of the set-
ting.
6) Press the PAUSE key to exit the setting without saving.
7) Once the setting is correct, press ENTER to save.
8) Press the EMERGENCY STOP to exit Service Mode..
7.2 SerViCe mode oVerVieW
fiGUre a
CHaPTer 7: SerViCe mode
Code
defaUlT
oPTioNS
deSCriPTioN
Service 1
Display Test
Press the ENTER key repeatedly to check each set of LEDs on the
display sequentially.
Service 2
KeypadTest
Press any key and the display should show the corresponding
message.
Service 3
Distance / Time
Distance:
Mile 0 - 99999
Kilometer0-160898
Time:
0 - 999999
Manually sets the Accumulated Distance and Time.
Service 4
CSafe / RF Test
Press the ENTER key to test CSafe. Press the ENTER key again
to test the RF module.
Service 5
Error Log
Shows the last 10 errors. Press and LEVEL UP and DOWN for 3
seconds to clear the errors.
Service 6
Set Date / Time
Press the LEVEL keys to move cursor, the number keys to set date
/ time, and the ENTER key to save.
Service 7
Export and Import Parameter
Export parameter : Export all parameter to USB
Import parameter 1: Import parameters to console without
accumulated distance and time and serial number.
Import parameter 2: Import parameters to console Include
accumulated distance and time and serial number.
Service 8
WiFi Function
Automatically detects the available IP address and displays it.
