Matrix simado gfx11, System Manual

Page: 65 / 88

Matrix SIMADO GFX11 System Manual 59
• Configure the “ Automatic Number Translation” table. The Automatic Number table consists of the Dialed
Number strings and the Substitute Number strings, the Calling Card Services Number Index and the
Calling Card Password Index.
• You must configure the prefix that you expect users to dial when they use this Calling Card as Dialed
Number string.
• As Substitute Number string, you must configure the number string that the system should dial out in
place of the Dialed string. In this case, the dialed number string and substitute number string are the
same: the prefix ‘00’.
• You must configure the Index number you assigned to the calling card in the Calling Card Services
Number Index of the ANT Table. In this example,
1 .
• You must configure the Index number you assigned to the password of the calling card in the Calling
Card Password Index of the ANT Table. In this example,
1 .
The ANT Table you configure would be as shown below:
• With the relevant tables configured, now, when the user dials the end destination number,
0014125126508, the system will check the ANT Table.
• If the number dialed by the user matches with the Dialed Number String in the table, the system checks the
Calling Card Number Services Number Index. It fetches the number configured for this index in the Calling
Card Services Number Table. The system dials out this number.
• After that, the system checks the Calling Card Password Index in the ANT table. It fetches the number
configured for this index in the Calling Card Password table, and dials out this number.
• The system then dials out the string configured as the Substitute number in the ANT table, and finally the
end destination number dialed by the user.
Example 2: Multi-stage Dialing in PCO application
A PCO owner at a remote rural, hilly area wants to provide telephony services to the residents of this area using
SIMADO GFX11 and a PBX located in an urban area where fixed lines CO and ISDN networks are available.
The following illustration shows how SIMADO GFX11 is connected with the PBX. Here, SIMADO GFX11 is located
at the PCO in the remote area. The PBX is located in the urban area and has a GSM card installed. The PCO and
the PBX have Closed User Group (CUG) services of the GSM service provider. The SIM Cards installed in
Index
Dialed Number
String
Substitute Number
String
Calling Card Services
Number Index
Calling Card
Password Index
1 00 00 1 1
2
3
4
5
6